but its g h e y not gay.Gay?
General Thread April 2012
#4821
Posted 28 April 2012 - 01:53 PM
NEEDS MOAR PEANUT BUTTER
#4822
Posted 28 April 2012 - 01:54 PM
Stuff goes here
#4823
Posted 28 April 2012 - 01:54 PM
#4824
Posted 28 April 2012 - 01:58 PM
Sig worthy.
#4825
Posted 28 April 2012 - 01:59 PM
Gay?
Lol so funny!
Rendo. Can replace one if needed. Much better than plug, lead, coil in my opinion

#4826
Posted 28 April 2012 - 02:02 PM
I would say that + is 12v supply from the EFI relay, G is earth and IB is the trigger from the ECU.
You could put it all back together and with the engine idling (misses at idle yeah?) unplug each injector (you could unplug the coils but injectors are better if the plugs can be gotten to) to isolate the miss.
Then leave the plugs in and swap the missing cylinders coil for another.
If the miss follows the coil, its a dud coil. If not swap the spark plug and see if the miss follows that.
If I told you I was a compulsive liar, would you believe me?
#4827
Posted 28 April 2012 - 02:06 PM
Shaz will quit smoking when Rendawg loses his virginity.
It was nice knowing you shazza.
#4828
Posted 28 April 2012 - 02:07 PM
Neither the plugs or the injector leads are in an accessible place when the engine is back together again. Mainly due to the Intake running over the top of the engine to the manifold.
Sig worthy.
#4829
Posted 28 April 2012 - 02:10 PM
Stuff goes here
#4830
Posted 28 April 2012 - 02:13 PM
Does you multimeter look like this?

If I told you I was a compulsive liar, would you believe me?
#4831
Posted 28 April 2012 - 02:16 PM
is that multimeter?
Jordan - MY02 Forester GT - Sydney
#4832
Posted 28 April 2012 - 02:19 PM
Digital ocilloscope (fast!), component tester, secondary and primary ignnition, OBDII and EOBD scan tool and a 4 gas analyser.
And a database of parts listings that would blow your mind.
All rolled into one.
IT ROCKS!!!
If I told you I was a compulsive liar, would you believe me?
#4833
Posted 28 April 2012 - 02:24 PM
I take it with a busted ankle, you will be working on your post count, Jase?

#4834
Posted 28 April 2012 - 02:25 PM
I take it with a busted ankle, you will be working on your post count, Jase?
I might bump it up a bit.
I coming after you!
What sort of fire are you getting.
Wood heater type or open?
I forgot to mention.
The FSA is a two channel ocilloscope.
..h.t..h..
If I told you I was a compulsive liar, would you believe me?
#4835
Posted 28 April 2012 - 02:26 PM
ooooh, and I recently hit 5k!!
Stuff goes here
#4836
Posted 28 April 2012 - 02:31 PM
Come at me bro!
Wood Heater type fireplace. http://www.burninglo...ng/turbo10.html
Can't wait for warmth!

#4837
Posted 28 April 2012 - 02:36 PM
Ive got to do a beer tasting at The Old Brewery this arvo. I really cant be arsed though.
Sig worthy.
#4838
Posted 28 April 2012 - 02:38 PM
I think all star do RB's
Stuff goes here
#4839
Posted 28 April 2012 - 02:44 PM
They are a great bit of gear.I played with an early digital CRO and it sucked, but a mate has a newer one (~5 years old at most) and its sweeeeeeeet
ooooh, and I recently hit 5k!!
That one is worth nearly $30k IIRC.
Nice.
Wood Heater type fireplace. http://www.burninglo...ng/turbo10.html
Can't wait for warmth!
I have a Coonara insert that sits in the fireplace.
One thing though, I bought mine as it does not have any fire bricks to crack as it uses a heavier plate steel instead. Its 13 years old and the plate at the top of the fire box is still as good a new.
see this is why I normally just take it to someone to fix. I quite simply dont know enough about it. All the RB specialists are on the other side of the city from me which is why i havent had it looked at sooner. Think I might just have to bite the bullet and take it far away. That is assuming I can put it back together again and get it working how it was.
Ive got to do a beer tasting at The Old Brewery this arvo. I really cant be arsed though.
Is there any way you can test resistance of the coils?
If I told you I was a compulsive liar, would you believe me?
#4840
Posted 28 April 2012 - 02:52 PM

0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users





This topic is locked






