DIY: make ur factory keyless entry flash the indicators
#21
Posted 09 December 2011 - 01:33 PM
#22
Posted 09 December 2011 - 01:36 PM
Mmm i just had it out for cleaning the pollen filter and havent been bothered to attach it all again incase i decide to get my ac fan looked at by subaru.
Cheers!
Forester thread: http://www.subyclub....forester-xt-04/
Liberty wagon: http://www.subyclub....-liberty-wagon/
#23
Posted 21 April 2012 - 07:58 PM
#24
Posted 24 April 2012 - 06:44 PM
mine does the indicators, parkers, fog lights and rear lights when i lock mine. pretty sure its stock too
Parkers and foggies and reverse lights?
Never seen that before. Sounds cool but.
Jordan - MY02 Forester GT - Sydney
#25
Posted 09 September 2013 - 09:50 AM
Just tried wiring up my Keyless entry following this DIY, ran into a problem with my revision Liberty SEP99 turns out I have a very different module,
This module/unit sits directly underneath my passenger (LHS) A/C vent, next to the CRU Module,
I have searched the internet for a pin diagram/information, but have found nothing regarding my revision Liberty or the Part # listed on the module. Will test the module now and come back with results.
Also I hope I found the right module, the single relay clicks when I open/unlock the car... Just very strange!
Car: Subaru Liberty RX MY00 Sedan
Build Thread
#26
Posted 09 September 2013 - 10:11 AM
yeah, unfortunately your module looks totally different, looks like it only has 1 relay on board which would be for the door lock motors.
I think that copper bar that runs around the perimeter is the radio antenna to pick up the key remote signal.
#27
Posted 14 September 2013 - 10:51 PM
Yeah, turns out all I have is the door open relay and that's it, SEP99 Liberty is A rev. isn't it?
Car: Subaru Liberty RX MY00 Sedan
Build Thread
#28
Posted 06 December 2013 - 10:00 AM
mine does the indicators, parkers, fog lights and rear lights when i lock mine. pretty sure its stock too
Thats sweet. Are you sure its stock?
#29
Posted 06 December 2013 - 12:09 PM
#30
Posted 06 December 2013 - 07:20 PM
Just remember that its 6 locks to enable, 6 unlocks to disable the feature (on later revisions). Mine blinks its indicators and bleeps when I lock and unlock. So give that a go before ripping your car apart lol.
#31
Posted 07 December 2013 - 12:01 AM
got a quick vid up of mine http://www.youtube.c...eature=youtu.be
#32
Posted 08 December 2013 - 10:56 PM
#33
Posted 28 April 2014 - 09:03 AM
Did your come like that?got a quick vid up of mine
I want it haha
Sent from my iPhone using Tapatalk
#34
Posted 01 January 2015 - 11:26 AM
I know that the outback's came with remote locking as an option, but when I got mine it didn't have a remote (had it for 12 months now) but figured that I should be able to get that sorted easily enough.
I know that a lot of vehicles where remote locking in an option, they will still have all the wiring in the vehicle, just no remotes. So I went out to find this little box just now, but found nothing... So, my question is, if mine didn't come with it, how easy is it to put it in? I didn't see a free plug that the box would go in to, so would just finding one in a wreckers possibly be out of the question?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users