Nope, no turbo.
NA 2.5 it shall remain.
At least while its off the road I'll go over the entire car so it'll be mint when back on the road.
Got a new drivers window today, PDR this week still, 30mm lower springs are ordered and 4 pots on their way. I also fixed the electrical aerial on the weekend and started detailing the interior which is coming up a treat so pretty happy other wise.
Yet another Suby wagon....
Started by CRUISN, Nov 09 2011 02:50 PM
1275 replies to this topic
#41
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 14 November 2011 - 03:44 PM
OEM+
#42
Scuba-Roo
-
- Members
-
- 6,960 posts
The local
- Gender:Male
- Location:Newcastle
Posted 14 November 2011 - 03:53 PM
I have a version 3 wiring loom to suit a gen2 Got the climate control module to go with it and an ecu 
Subyclub, The place where random internet weirdos become good mates
#43
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 14 November 2011 - 04:10 PM
ZERO interest in turboing it.
Not going to happen.
With the previous owner paying half, I should be able to get a rebuilt motor from Miles that'll last a long time and I'll be out of pocket about $1600. Thats way less than the cost of turboing it.
Not going to happen.
With the previous owner paying half, I should be able to get a rebuilt motor from Miles that'll last a long time and I'll be out of pocket about $1600. Thats way less than the cost of turboing it.
OEM+
#44
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 17 November 2011 - 04:48 PM
Sorted thanks to AMAuto yet again.
Hopefully not too long til its back on the road with a fresher 2.5 in it.
Hopefully not too long til its back on the road with a fresher 2.5 in it.
OEM+
#45
RX25SE
-
- Members
-
- 12,751 posts
...............Car nerd................ now a H6 pilot
- Gender:Male
- Location:Melbourne eastern 'burbs
- Interests:Cars with chrome bumpers!
Posted 17 November 2011 - 05:48 PM
Did you ship the heads to Qld Mark?
If I told you I was a compulsive liar, would you believe me?
#46
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 17 November 2011 - 06:03 PM
Nope, I wasnt keen on rebuilding this one.
Theyve found a 140km engine thats compression tested fine. They will remove and skim the heads, install new headgaskets, all new seals, new timing belt, water pump and thermostat and ship it to me and I'll fit it.
This way I know the engine will give me no dramas in the future.
Theyve found a 140km engine thats compression tested fine. They will remove and skim the heads, install new headgaskets, all new seals, new timing belt, water pump and thermostat and ship it to me and I'll fit it.
This way I know the engine will give me no dramas in the future.
OEM+
#47
RX25SE
-
- Members
-
- 12,751 posts
...............Car nerd................ now a H6 pilot
- Gender:Male
- Location:Melbourne eastern 'burbs
- Interests:Cars with chrome bumpers!
Posted 17 November 2011 - 06:07 PM
I see.
Sounds like a plan.
Sounds like a plan.
If I told you I was a compulsive liar, would you believe me?
#48
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 17 November 2011 - 08:39 PM
Ive always got a plan.
OEM+
#49
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 25 November 2011 - 08:03 PM
Well the car doesnt drive very far, but it stops better now. 
OEM+
#50
RX25SE
-
- Members
-
- 12,751 posts
...............Car nerd................ now a H6 pilot
- Gender:Male
- Location:Melbourne eastern 'burbs
- Interests:Cars with chrome bumpers!
Posted 26 November 2011 - 09:13 AM
Mods to come...
Gen4 Liberty GT 17's - tomorrow
New discs / pads - tomorrow
20% window tint - next week
PDR - next week
Lowered 30mm - next week
Fujitsubo diff back - on its way from Japan
Front bar - on its way from Japan
Rear bar - respray in the near future
Not quite how I change pads.
If I told you I was a compulsive liar, would you believe me?
#51
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 26 November 2011 - 12:21 PM
Haha, yeh well I did get the new standard discs and pads but then these came up the day I was going to fit them.
Couldnt resist...
Also removed the rear struts to put new springs in and the struts are finished. Push the shaft down and it doesnt return, It actually slowly drops by itself. Cant say it was unexpected on a 226km car.
New struts all round are on their way and I should fit them all Tuesday along with new front and rear sway links . This car will be like new soon.
Fingers crossed the engine is here sometime next week as I'm aiming to fit it next Saturday.
Couldnt resist...
Also removed the rear struts to put new springs in and the struts are finished. Push the shaft down and it doesnt return, It actually slowly drops by itself.
Cant say it was unexpected on a 226km car.New struts all round are on their way and I should fit them all Tuesday along with new front and rear sway links . This car will be like new soon.
Fingers crossed the engine is here sometime next week as I'm aiming to fit it next Saturday.
OEM+
#52
Shaz
-
- SC Videographer
-
- 23,188 posts
Differential Studios
- Gender:Male
- Location:Northern Beaches, Sydney
Posted 26 November 2011 - 05:42 PM
Pics of whole car Mark?
I put up with people from amnesty, red cross and now the cancer council almost daily hounding me!! Throw in the greens, green peace, unhcr, save the forking children and I've well and truly hit my limit for the number of fuckstains wanting me to sign something or give money. Seriously cubts,right off.
#53
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 26 November 2011 - 05:50 PM
Pics of whole car Mark?
Definitely, when I deem it photo worthy.
OEM+
#54
Shaz
-
- SC Videographer
-
- 23,188 posts
Differential Studios
- Gender:Male
- Location:Northern Beaches, Sydney
Posted 26 November 2011 - 06:04 PM
Hahahaha. Fair enough. You bloody hold out. :-)
I put up with people from amnesty, red cross and now the cancer council almost daily hounding me!! Throw in the greens, green peace, unhcr, save the forking children and I've well and truly hit my limit for the number of fuckstains wanting me to sign something or give money. Seriously cubts,
#55
Marv
-
- Members
-
- 1,607 posts
Rapist
- Gender:Male
- Location:Central Coast - NSW
Posted 27 November 2011 - 08:34 AM
What are you doing with the old 2.5, Mark?
Pork Hunt Motorsport
#56
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 27 November 2011 - 10:35 AM
What are you doing with the old 2.5, Mark?
I was going to put it in the back of my neighbours truck so he can take it to the tip on his next run.
If you want it, PM me and we can discuss.
OEM+
#57
Marv
-
- Members
-
- 1,607 posts
Rapist
- Gender:Male
- Location:Central Coast - NSW
Posted 30 November 2011 - 07:37 AM
PM sent, Mark 
Pork Hunt Motorsport
#58
wraithrslib
-
- Members
-
- 76 posts
New Member
Posted 05 December 2011 - 03:28 PM
Hi mark looking forward to so pics mate ;-)
cheers wayne
cheers wayne
#59
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 05 December 2011 - 11:40 PM
Cheers Wayne.
Pics shortly......
Well, new struts, springs and sway bar links fitted AND new engine fitted on the weekend. Drives nicely. Just waiting on the rear bar to be sprayed (hopefully tomorrow) and then I'll take some pics.
Although Ive already changed my mind on a few things so new rims are on their way.
Pics shortly......
Well, new struts, springs and sway bar links fitted AND new engine fitted on the weekend. Drives nicely.
Just waiting on the rear bar to be sprayed (hopefully tomorrow) and then I'll take some pics.Although Ive already changed my mind on a few things so new rims are on their way.
OEM+
#60
CRUISN
-
- Members
-
- 6,970 posts
Doin it my way.
- Gender:Male
- Location:Melbourne
- Interests:Family, Surfing, Cars.
Posted 08 December 2011 - 09:08 PM
Its slowly getting there.....
I replaced the motor on the weekend, fitted new shocks and lowered springs all round, fitted new f & r swaybar links. Had my PDR guy come around and tidy the car up. Bought a brand new bumper which I just fitted this morning after getting sprayed. Ive basically stripped and cleaned the entire interior which came up a treat.
Still in the process of going over the paintwork, drivers side and tailgate done.
Plans afoot...
Tint (after RW)
Fujitsubo diffback (on its way)
Work Emotion 17 x 7.5 +48 (on their way) will be color coded to lower body.
Rear two pots (gotta match the fronts :roll: )
Respray front RHS guard and bonnet (dented) when I get the front bar.
Replace front bar (on its way) current one has AIDS and Leprosy.
Then it should be pretty neat.
I replaced the motor on the weekend, fitted new shocks and lowered springs all round, fitted new f & r swaybar links. Had my PDR guy come around and tidy the car up. Bought a brand new bumper which I just fitted this morning after getting sprayed. Ive basically stripped and cleaned the entire interior which came up a treat.
Still in the process of going over the paintwork, drivers side and tailgate done.
Plans afoot...
Tint (after RW)
Fujitsubo diffback (on its way)
Work Emotion 17 x 7.5 +48 (on their way) will be color coded to lower body.
Rear two pots (gotta match the fronts :roll: )
Respray front RHS guard and bonnet (dented) when I get the front bar.
Replace front bar (on its way) current one has AIDS and Leprosy.
Then it should be pretty neat.
OEM+
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
