B4/LIB Ipad for av sytem
#1
Posted 18 January 2012 - 12:32 PM
And before you ask Climate control will be mounted in glovebox
#2
Posted 18 January 2012 - 12:52 PM
#3
Posted 18 January 2012 - 12:57 PM
Play music through iPad? Is it rigged to your car stereo?
I put up with people from amnesty, red cross and now the cancer council almost daily hounding me!! Throw in the greens, green peace, unhcr, save the forking children and I've well and truly hit my limit for the number of fuckstains wanting me to sign something or give money. Seriously cubts, right off.
#4
Posted 18 January 2012 - 01:08 PM
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
#5
Posted 18 January 2012 - 01:36 PM
Nice fit though!
#6
Posted 18 January 2012 - 01:44 PM
You need some digital gauges up top and digial climate control down the bottom or something
#7
Posted 18 January 2012 - 01:47 PM
Nice clean work tho.
NEEDS MOAR PEANUT BUTTER
#8
Posted 18 January 2012 - 02:13 PM
Ugh i could ramble on for forking days about this stuff.
#9
Posted 18 January 2012 - 02:24 PM
Bluetooth OBD-II dongle and Dash Commander and that would be an awesome setup.
That is on the list dont worry( i am going to go the plx way with dash commander and a boost sender(Giant boost gauge in the center console WOOOOOHOOOOOO)
and music will be sent to an amp via av cable
#11
Posted 18 January 2012 - 02:47 PM
#12
Posted 18 January 2012 - 03:00 PM
Like you said, wrong way for movies.
Only improvement I can see would be too cut a hole then mould a fibreglass groove in the bottom fascia so that the circle button is completely exposed...can be done with fibreglass repair kit.
And is that faux carbon fibre vinyl wrap on the centre console??
For shame.
#13
Posted 18 January 2012 - 03:55 PM
That is on the list dont worry( i am going to go the plx way with dash commander and a boost sender(Giant boost gauge in the center console WOOOOOHOOOOOO)
and music will be sent to an amp via av cable
i have a PLX Kiwi wifi and REVs App, and it doesnt work in my B4, i dont know if there is a different cable that you can get.
#14
Posted 18 January 2012 - 06:13 PM
That's innovative.
Like you said, wrong way for movies.
Only improvement I can see would be too cut a hole then mould a fibreglass groove in the bottom fascia so that the circle button is completely exposed...can be done with fibreglass repair kit.
And is that faux carbon fibre vinyl wrap on the centre console??
For shame.
I wont be playing movies anyways and this is a work in progress not finised yet and yeah i already put dent in for home button
mainly for music and I want to run gauge apps
carbon fiber wrap gone FAIL lol
here a vid of it so far, dont pay out on surround (its not finished)
will put up some pics of how i mounted it tomorrow when i put amp in
still have to overcome volume control because when you plug av leads in there is no vol. (trip to Jaycar) might have to mount a dial
climate control mounted in glove box was easy the cables to it reach except the out air temp hose i will have to get some more pipe
and some perspex to make a cover for it
http://youtu.be/QyPdhet1ODg
#15
Posted 18 January 2012 - 07:06 PM
#16
Posted 18 January 2012 - 07:21 PM
#17
Posted 18 January 2012 - 07:25 PM
I have a PLX bluetooth unit that I want to get rid of if you haven't bought one yet.
That is on the list dont worry( i am going to go the plx way with dash commander and a boost sender(Giant boost gauge in the center console WOOOOOHOOOOOO)
and music will be sent to an amp via av cable
I really like the setup, I was thinking about doing the same thing with a cheapy android tablet, since you can get them for like $150 now. You might want to look into an anti-glare screen protector - with the ipads glossy screen I can picture it being a nightmare when the sun hits it.
I would have gone to the kitchen, collected a brown bag, dropped my dacks, pinched off a loaf in said bag, done up dacks, stickytaped bag, placed bag in envelope, and mailed it right to your face for being such a tool.
It's ok, sometimes when we herp, we also derp.
#18
Posted 18 January 2012 - 08:03 PM
i have a PLX Kiwi wifi and REVs App, and it doesnt work in my B4, i dont know if there is a different cable that you can get.
I have a PLX bluetooth unit that I want to get rid of if you haven't bought one yet.
I really like the setup, I was thinking about doing the same thing with a cheapy android tablet, since you can get them for like $150 now. You might want to look into an anti-glare screen protector - with the ipads glossy screen I can picture it being a nightmare when the sun hits it.
bd-850\
have you tried torque or dashcommand and also what year is your b4 as it will only work with late 01 onwards(denso)
has to be obd2 compilant
Xon
I need the PLX wifi-imdf one for what I am setting up (bluetooth one only good if you iDevice is jailbroken)
#19
Posted 18 January 2012 - 08:06 PM
I would have gone to the kitchen, collected a brown bag, dropped my dacks, pinched off a loaf in said bag, done up dacks, stickytaped bag, placed bag in envelope, and mailed it right to your face for being such a tool.
It's ok, sometimes when we herp, we also derp.
#20
Posted 18 January 2012 - 09:21 PM
Hmm mine doesn't play with my ECU either. I just assumed it was some issue reading a JDM ECU. Yes it's a denso, and my tactrix cable reads it fine, so maybe PLX devices don't work with Subaru?
yeah i dont know i might have to look more at this dont what to pay $200 for plx wifi and $50 for app and find out it dosent work
I am going to get amp and a line level dial tomorrow I am not going to mount the vol control as it will only be temperary until this one comes
http://www.ebay.com....984.m1438.l2649
IDEAS PLEASE WHERE TO MOUNT TOUCH VOL CONTROL
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users