my little toy
#1
Posted 19 February 2012 - 06:39 PM
so i finally made the decision to buy another rs, good or bad im not sure as yet, cause the car still runs...
alright here goes
Car 1991 Liberty RS
Colour Charcoal Grey
Under the hood
Engine: standard bottom end (soon to upgraded to v2 sti RA)
Turbo: vf34 (soon to be upgraded to AVO400L)
Cooling: custom fmic w/ CAI
injectors: sard 650cc with collars
exhaust: some mrt thing apparently 3" all the way back (muffler changing soon)
ECU: EMS8860
Boost controller: Apexi AVCR
Driveline
V3 sti box and diff (4.44 ratio)
Handling
HKS hypermax 2 coilovers
a 22mm rear sway bar
sti pink rear lateral arms
Braking
4 pot fronts with slotted discs
2pot rears with matching hubs
braided brake lines all round
Wheels
18x7.5 (+42) 6 spoke Lenso's with 225/40/18 rubber
Exterior
custom front bar
front lip
Legacy chrome door handles
Legacy rear bumper
Legacy tail lights
Legacy rear Garnish
wing now removed and same as the **** night shades
how she sits now
#2
Posted 19 February 2012 - 06:48 PM
Nice car too!
- Alex.
Ugh i could ramble on for forking days about this stuff.
#3
Posted 19 February 2012 - 06:58 PM
Get out of my thread.
#4
Posted 19 February 2012 - 07:29 PM
#5
Posted 02 May 2012 - 07:06 PM
Rota Gforce 17x8 +48 with KU36 215/45/17
#6
Posted 02 May 2012 - 07:44 PM
#7
Posted 02 May 2012 - 07:56 PM
the only thing that i dont like is the chrome door handles but thats just me.
#8
Posted 02 May 2012 - 08:25 PM
Thanks for the comments, more pics to come
#9
Posted 02 May 2012 - 08:28 PM
This place needs moar RS... Scotty's is a fine example!
#10
Posted 02 May 2012 - 10:48 PM
#11
Posted 02 May 2012 - 10:55 PM
#13
Posted 02 May 2012 - 11:50 PM
at the end of the day look at your tire size, i personally dislike 35 and 40 series tires, i think they are too low, so if a 215/45/17 tire would be the correct rolling diameter for your car then id just stick with 17's, casue they 18's equivilant would be a 215/40/18 and the gforce fo to a 8.5inch wide rim, a lot of tire stretch...
just my opinion
#14
Posted 03 May 2012 - 02:31 AM
#15
Posted 03 May 2012 - 09:53 PM
#16
Posted 03 May 2012 - 11:19 PM
Thanks for the parts last night, good deal!
As Aek said can't wait to see next stage
Cheers,
Zach.
Go away you coathanger dodging failed abortion.
#17
Posted 04 May 2012 - 08:24 AM
Also did I meet/cruise with you down to RSLC Chevallier show?
#18
Posted 04 May 2012 - 11:19 AM
do love gen1s
Forester thread: http://www.subyclub....forester-xt-04/
Liberty wagon: http://www.subyclub....-liberty-wagon/
#19
Posted 04 May 2012 - 12:07 PM
Nice subtle mods mate. Doesn't draw too much attention.
Cheers,
Shazza
I put up with people from amnesty, red cross and now the cancer council almost daily hounding me!! Throw in the greens, green peace, unhcr, save the forking children and I've well and truly hit my limit for the number of fuckstains wanting me to sign something or give money. Seriously cubts, right off.
#20
Posted 04 May 2012 - 06:56 PM
FR34KO - very happy with the wheels, definately made the right choice in changing them, cant be any happier how they are, im still undecided about the wing, its sitting in the roof of the garage so hasnt gone too far, my only issue is that i dont have a 3rd brake light... therefore gotta be careful of defect stations... nil tints for the rears wanna try keep it relatively origional as these parts are hard to come across
Shazza - thanks man, good to meet a few more people off the forum finally, espically from around the beaches ares. Are you heading to the Envy dyno day tomorrow
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users