7552 replies to this topic

[Liberty]

New radiator equals more powerz!

Gonna go beach. Probably Coogee Maroubra beach. Mates went last week and said the water was cold enough for your dick to invert.

[Adam]

Ecu reset more like it

Supercheap is busy as fark!!

[Harry88]

Ecu reset more like it

Supercheap is busy as fark!!

I was gonna pop in later on to get a breaker bar.

Also my desktop pc seems to have finally given up the ghost

[Liberty]

What's happened to it? Might not get your reply straight away as I'm off to Maroubra beach.

[Harry88]

What's happened to it? Might not get your reply straight away as I'm off to Maroubra beach.

Not sure. I left it going last night when I was out. Came back home and it was still running but the display wouldn't come back on. Power button wouldn't turn it off so I unplugged it from the wall. Now it will power on but no post, no beep sounds.

[U-Shell]

Trying everything to improve my fuel economy lately. Cleaned all sensors in the intake area and attempted to clean o2 sensor. Pulled of the plugs from to coil pack to give them a clean and make sure they are still all good and got this lol...


Note the cleaner gold one below !


Cleaned it with contact cleaner and inside the boot. Drove about 50k's last night, popped it off again this morning and was the same Time for some new leads? Just go OEM since it's a Gen 3 running -20psi haha?

[B4TT]

North Korea declares state of war on South.

Well that escalated quickly!

[skillionaire]

Link? I on phoun

[Adam]

Holy shit! At least it's not war on the US

Trying everything to improve my fuel economy lately. Cleaned all sensors in the intake area and attempted to clean o2 sensor. Pulled of the plugs from to coil pack to give them a clean and make sure they are still all good and got this lol...


Note the cleaner gold one below !


Cleaned it with contact cleaner and inside the boot. Drove about 50k's last night, popped it off again this morning and was the same Time for some new leads? Just go OEM since it's a Gen 3 running -20psi haha?

Standard leads will do fine

[B4TT]

Adam, they reckon they have a strike plan for the US LOL!!! They won't do shit
http://www.news.com....8-1226609165555

[Adam]

On the abc last night, the dude said NK don't have the reach for the us.

Just 'ing nuke the dude losing his shit already.

[B4TT]

IF they were going to strike the US, I think the first they would hit for is the bases in South Korea and Japan, but again, it is most likely just scare tactics to get the US and S Korea to the table to drop some of the sanctions.

[Adam]

Sounds legit.


I bought black paint for my wheels.

Kill me now.

[Adam]

What a day!!!

[peteRS]

Only if plasti-dip
I have lots to do this arvo...Ima get cracking

[Adam]

Plasti dip.

I hate those words!

[skillionaire]

On the abc last night, the dude said NK don't have the reach for the us.

The most venerable and valuable country in the world is where we're all sitting right now. People tend to forget that.

[peteRS]

I feel absolutely NO threat from NK. I think South Korea would object to Adam's 'just nuke 'ek' idea too. But I'm onboard

[Samwise]

Don't know. Haven't seen anything about them to be honest. I can see that they sell them at Repco, but something is wrong with their site and they don't provide any product details. Calibre is their house brand, but apparently it is from the makers of Bendix...

I'm open-minded when it comes to this though. Everyone has different opinions but it is those that have/are currently using whatever brand that will have the best feedback. I vaguely remember my dad using Ferodo pads, I just can't remember driving his car with them installed.

I use Bendix 4x4 pads. Pretty decent, just all the dust

I bought black paint for my wheels.

Kill me now.

Why? I plan on doing this. After I fix the gutter rash. Trying to find a good place for powder-coating, but I dunno. Any recommendations?

[U-Shell]

Trying to find a good place for powder-coating, but I dunno. Any recommendations?

Just remember that if you scratch powder coat, it turns into a cancer and will just start peeling away from the scratch, to fix, you have to completely strip the powder coat and re do it. I also found that no matter how I cleaned my old wheels (Powder Coated) they would always get swirl marks and light scratches in them. Took me ages to polish them all out. Plus side is it's pretty cheap!