Not to mention the aerodynamic gains!!Not to mention the weight saving deleting the plug.
That equates to a considerable increase in acceleration.
DIY - Gen 2 sedan extra brake lights
#21
Posted 12 April 2013 - 10:58 AM
#22
Posted 12 April 2013 - 11:51 AM
I have tow bar... and I can haz a trailer...It is the trailer harness plug
The b4 doesn't have it because they don't have enough power to tow a trailer. So it's not needed
Ducktape FTW... love it... Need some of that for Aek for the Hunter cruise...But, if you want some extra brake lights on your B4, I suggest duct-taping one of these bad boys onto your rear spoiler.
http://www.superchea...id=284677#Cross
But seriously... so slack... B4 should be able to do everything... it is mythical after all...
2002 B4 Rev E
2004 Outback Premium 3.0R
#23
Posted 12 April 2013 - 11:55 AM
It does do everything, but only in Japan, as an RSKBut seriously... so slack... B4 should be able to do everything... it is mythical after all...
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
#24
Posted 12 April 2013 - 12:19 PM
As soon as i mentioned 300kw I was in trouble
#25
Posted 12 April 2013 - 12:20 PM
You CAN do this. For maximum boat trailer light stealthness.Trailer plug??? You dodgey prick. In the harness that goes into the spolier, thats where you are suppose to do it.
#26
Posted 12 April 2013 - 01:28 PM
Trailer plug??? You dodgey prick. In the harness that goes into the spolier, thats where you are suppose to do it.
Never seen anyone do this.
#27
Posted 12 April 2013 - 01:50 PM
Haven't turned my computer on in about 18 months. (desktop) Normally just use my phone or macbook. hopefully it turns on.
Shame about ozlib. It had a lot of DIY on there.
As soon as i mentioned 300kw I was in trouble
#28
Posted 12 April 2013 - 02:38 PM
No one could ever find a DIY on OzLib for it so I made the one above.
#29
Posted 12 April 2013 - 02:41 PM
Does that mean all the H6 in Gen2 thread and all that other greatest is gone!!??
OH NOES!!!
#30
Posted 12 April 2013 - 03:19 PM
Does that mean all the H6 in Gen2 thread and all that other greatest is gone!!??
That was on this forum! You're safe
#31
Posted 12 April 2013 - 07:59 PM
#32
Posted 12 April 2013 - 09:12 PM
Too much work... but thanks...@Zac,if you want more brake lights, obtain a jdm garnish and play around with the wiring, presto extra brake lights
2002 B4 Rev E
2004 Outback Premium 3.0R
#33
Posted 13 April 2013 - 09:30 AM
Cheers for the DIY
#34
Posted 13 April 2013 - 11:10 AM
Only half a can? That huntsman was a wimp...This DIY took me 1minute only drama was a MASSIVE huntsman come charging at me so he received half a can of mortiene
Cheers for the DIY
2002 B4 Rev E
2004 Outback Premium 3.0R
#35
Posted 13 April 2013 - 01:28 PM
#36
Posted 13 April 2013 - 02:14 PM
#37
Posted 27 January 2014 - 06:25 PM
I actually found the pics from the old Ozlib days.
I can post them up if you want so you can see how all the cool kids were doing it many moons ago hahahahaha - and yes, the green car was done to OzLib spec lolz
As soon as i mentioned 300kw I was in trouble
#38
Posted 27 January 2014 - 06:27 PM
Chuck them up. I've never seen them and I joined OzLib in 2008.
#39
Posted 28 January 2014 - 08:02 PM
Sent from my GT-I9305T using Tapatalk
#40
Posted 28 January 2014 - 08:28 PM
Yeeew
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users