VIC is best as any plate is a one off cost. No yearly fee's like NSW. It's understandable though as NSW also hosts the Mardi Gra......

Matt's 3.0r Spec B
#21
Posted 04 June 2016 - 07:01 PM
OEM+
#22
Posted 04 June 2016 - 07:02 PM
+69.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#23
Posted 27 August 2016 - 03:08 PM



#24
Posted 27 August 2016 - 03:43 PM
Would love to do this to my outback....
#25
Posted 27 August 2016 - 04:09 PM
Looks good buddy, where did you pick up the head unit surround.
Would love to do this to my outback....
Thanks mate. Facia was from from HardwareBoB on club liberty.
#26
Posted 27 August 2016 - 04:16 PM
No worries buddy, thanks for letting me know....
#27
Posted 27 August 2016 - 04:36 PM
Looks good, but my inner perfectionist isn't liking the colour difference.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#28
Posted 27 August 2016 - 04:54 PM
Looks good, but my inner perfectionist isn't liking the colour difference.
Thanks, It annoys me to. Yet to see a facia that matches perfectly. Its like they made it from the material of the cubby above it instead of the climate control. Its a genuine part to
#29
Posted 27 August 2016 - 04:56 PM
Haha, I bet it does. It does what you intend it to do so that's all that matters.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#30
Posted 27 August 2016 - 05:07 PM
Haha, I bet it does. It does what you intend it to do so that's all that matters.
Thats it, I had to wait a couple of weeks for it to arive after i installed the headunit to so it still felt real good not to have a hole there anymore. I Installed the facia and SWC adapter about a mounth after everything else because of postage haha
#31
Posted 27 August 2016 - 05:16 PM
Very nice. I'm pretty sure you can still order the factory auxiliary connection as well; I remember reading it somewhere on the SubyClub or club.liberty forum.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#32
Posted 27 August 2016 - 05:28 PM
Yea think you can get them from dealerships, I wanted a better sounding system as well though
#33
Posted 27 August 2016 - 07:57 PM
Looks fine/factory to this tubular tubby.
#34
Posted 27 August 2016 - 09:09 PM
not quite haha.
#35
Posted 27 August 2016 - 09:30 PM
Looks good mate, a double din suits so nicely in there. I didn't ever get the pleasure to try the macintosh system in my car haha.
#36
Posted 27 August 2016 - 09:36 PM
Looks good mate, a double din suits so nicely in there. I didn't ever get the pleasure to try the macintosh system in my car haha.
Thanks mate, you didn't miss out on much haha, it looked nice that's about it.
#37
Posted 28 August 2016 - 04:45 PM
Thanks mate, you didn't miss out on much haha, it looked nice that's about it.
Haha so I've heard my biggest thing is having the reverse camera on it which makes it so nice.
#38
Posted 02 November 2016 - 01:09 PM
Spring difference:

Installed them Sunday and it's given about a 20mm drop on the front and 15mm at the back so far and they may settle in further.

If anything the ride is more comfortable and I've had no scrubbing yet, only problems are I have have 1.35 deg of rear camber so I'll get rear camber bushings soon and there was a lot of grease around the top hat bearings so they might be failing. Sometimes I'm not sure why I bother getting alignments though I eyeballed the front camber perfectly ( did the same with the outback haha) and it was clear the rear had to much camber.

Tucking the rear and almost invisible car haha.
Also just got new bearings for the belt idlers, using corgiworks idea, as the old ones fully forked just waiting for free time to do it at work with the press.
#39
Posted 09 November 2016 - 11:24 PM
The car looking great Matt.
Are we going to see it @ the xmas bbq ??
#40
Posted 10 November 2016 - 09:10 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users