Most likely aftermarket, been taking a look at the haltech elite 750 series recently.
I dont think the 750 does 6cyl does it? 1500 is what youd need
Posted 01 July 2016 - 01:45 PM
Most likely aftermarket, been taking a look at the haltech elite 750 series recently.
I dont think the 750 does 6cyl does it? 1500 is what youd need
Posted 01 July 2016 - 02:05 PM
I dont think the 750 does 6cyl does it? 1500 is what youd need
Posted 01 July 2016 - 02:13 PM
Posted 01 July 2016 - 03:13 PM
According to the haltech site it can run a 6 cylinder engine and has 6 fuel and ignition outputs, the 1500 has 4 fuel and ignition, and the 2500 had 8. Would have thought it'd be the other way around
intredasting. Does the 750 do knock control and all that? Must be smaller and cheaper for a reason
Posted 01 July 2016 - 03:25 PM
intredasting. Does the 750 do knock control and all that? Must be smaller and cheaper for a reason
Posted 20 September 2016 - 08:15 PM
Things have been going pretty slowly lately, been flat out with work. We've sold the 06 Impreza and bought something a bit quicker now that the woman has her full license, another outback previously owned by Joel, with the complete 205 conversion.
Should hopefully see some new brakes, bumpers and suspension mods on it down the track. Plus all the spare goodies from my car.
Posted 20 September 2016 - 08:23 PM
Nice purchase Sam.
You guys are a turbo outback couple, or soon will be.
Posted 20 September 2016 - 08:56 PM
Ha! That's awesome.
Good to see Joel's car go to a good & knowledgeable home.
Posted 20 September 2016 - 09:25 PM
Got a his and hers now, that's a bit cute.
Saw you'd posted an update, got all excited about what could have been. Better hurry up and get those new goodies together, old man river might be finished his conversion before you're done...
Anyway, torqued to spec is just the manuals way of saying 'we couldn't get it any tighter, see if you can'.
Posted 20 September 2016 - 09:43 PM
old man river might be finished his conversion before you're done...
>implying OMR will ever do his conversion let alone has a half cut
Posted 20 September 2016 - 10:31 PM
Posted 20 September 2016 - 10:41 PM
What's a halfcut ??
Posted 21 September 2016 - 01:00 PM
What's a halfcut ??
Its how we put up with you, we're all half-cut all the time
Anyway, torqued to spec is just the manuals way of saying 'we couldn't get it any tighter, see if you can'.
Posted 22 September 2016 - 12:00 AM
Its how we put up with you, we're all half-cut all the time
Careful bitch, or no more rides home !
Posted 25 September 2016 - 09:45 PM
New wheels to replace the ugly Outback stocko's, OZ racing superleggara, 18x8 +35. The design is pretty similar to my Enkei GTC01s.
Also in the pic above is some sneaky audio gear, which is now in.
Posted 26 September 2016 - 12:09 AM
Oh yes, Superleggera twins! That is a sweet offset too.
PS if you ever want to sell those OZs let me know.
Posted 20 October 2016 - 07:14 PM
Watching this with interest.
Car look's great!
Posted 27 October 2016 - 05:37 PM
Been busy fixing up and acquiring some new parts for the '02 Outback.
Have some cool parts on the way from japan; weathershields (if they dont break), legacy garnish, sti pedals.
Been chasing a few issues with a misfire which turned out to be loose plugs and a squealing AC belt which turned out to be a broken tensioner. $4 for a replacement part, which I bundled with some of the items I need for the delift.
Picked up a set of 4/2 pots from what looks like a GC8. (Raised lettering), I wasn't aware that these also came with a rear 2 pot caliper, unless they were available on a type RA-R STI or something?
Also fitted over my old B4 mirrors and extra set of black door cards to remove all the grey in the car.
H6 Turbo headers
Posted 28 October 2016 - 10:43 AM
Hey Sam if the new outback needs a set of black plastic door sill panels, let me know. I have a set in Newcastle.
Mark
"Installation is the reverse of the removal procedure."
BH9 02-05 / BD9 07-14 / BE5 14-> / GGA 18->
2001 Legacy B4-RSK / 1999 ZX-9R C2
Posted 28 October 2016 - 11:21 AM
Hey Sam if the new outback needs a set of black plastic door sill panels, let me know. I have a set in Newcastle.
Mark
I have a spare set of those as well. Thanks though!
0 members, 0 guests, 0 anonymous users