OMAR Cubt
Posted 11 October 2016 - 11:02 PM
Their roads are smooth but noisey as fork, was terrible with no back seat on the way over. Our roads are shit house but quiet at least haha. Between the border and Horsham are forked. Nearly tore my sump off
Once i turned my coilovers to max soft it handled it fine. GF didnt complain once about the ride
Fark. Some of the roads in NSW are crap.
So over forking pot holes.
Good to hear the car ran well all the way.
Regular Member
Posted 13 October 2016 - 07:20 AM
Nice the interior looks very tidy....
Have fun with the PFC, I have one to throw in my RS.........
Touring Bruce
Posted 20 October 2016 - 04:55 PM
Plugged my controller into Tys PFC, same deal, nothing. So at least its the controller thats dead not the ecu. For the sake of research we plugged my PFC into Tys car and tried his controller, his controller boots but freezes on the apexi logo which means incompatible controller with the ecu. My ecu is a GC8DL his is just a GC8D. We very much hoped that this meant mine was a Pro version which means spark cut instead of fuel and launch control.
So to find out I took it all over to our mates place who has an FC Datalogit and plugged it all in. The ecu does have a tune in it but its not great, usable but not great. For some reason the ecu wasnt set to use an STi orange maf so once that was changed it ran way better than when i had been testing it, oh and its not a pro unfortunately :\
TL;DR ECU works, hand controller dead. Not a huge deal as a newer OLED controller is available thats universal across the PFCs which is awesome albeit expensive.
Member's Member
Posted 20 October 2016 - 05:58 PM
OMAR Cubt
Posted 20 October 2016 - 10:41 PM
Cool story Hansel.
Haha. Wrecked by Niko.
How muck is the new hand controller ??
Touring Bruce
Posted 21 October 2016 - 06:26 AM
About 500 bucks ATM cos the dollar is poo. Does kill the bargain a bitHaha. Wrecked by Niko.
How muck is the new hand controller ??
OMAR Cubt
Posted 23 October 2016 - 11:21 PM
Fark, that more than I thought it might cost.
Xmas present from Bailey sounds good.
Touring Bruce
Posted 16 November 2016 - 03:40 PM
Braided oil feed cos why not. Hardline would have had nearly 20 years worth of oil spooge in it. This doesnt. Only slightly ruined my back 5/7 would do again. Yes i replaced the wastegate vacuum line 
Rock'n the old Skool
Posted 20 November 2016 - 12:15 PM
It seems a bit long mate! I guess it'd make removal easier.
No pretty turbo cover for your ride? Or is the chimney an RS thing?
Cheers
Bennie
Touring Bruce
Posted 20 November 2016 - 02:46 PM
Length means it's more flexy and easy to deal with. Stops it kinking and bending too I spose. No heatshield. Won't fit over the bellmouth dump.I don't think. Turbo beanie one day. The chimney is an rs thing yupIt seems a bit long mate! I guess it'd make removal easier.
No pretty turbo cover for your ride? Or is the chimney an RS thing?
Cheers
Bennie
Adriano
Posted 20 November 2016 - 02:49 PM
It seems a bit long mate! I guess it'd make removal easier.
No pretty turbo cover for your ride? Or is the chimney an RS thing?
Cheers
Bennie
Touring Bruce
Posted 09 December 2016 - 02:34 PM
Snack down!
Posted 09 December 2016 - 03:19 PM
Member's Member
Posted 09 December 2016 - 04:49 PM
Touring Bruce
Posted 09 December 2016 - 05:11 PM
Dirty car, clean pods, daily, image compression, dirty area of the car, don't care. Pick oneColour match fail.
Member's Member
Posted 09 December 2016 - 08:56 PM
Regular Member
Posted 09 December 2016 - 10:55 PM
Dirty car, clean pods, daily, image compression, dirty area of the car, don't care. Pick one
Should have cleaned the car beforehand 
Anyway, torqued to spec is just the manuals way of saying 'we couldn't get it any tighter, see if you can'.
Touring Bruce
Posted 09 December 2016 - 11:54 PM
Yeah nah nah nah nah yeahShould have cleaned the car beforehand
Trusted Member
Posted 10 December 2016 - 11:54 PM
Just read the entire thread. Nice build Barbbachello, actually... an excellent build. Grats to the Mehican crew for helping your build, nicely done peeps. Totally peeved to read your ride was nicked & twice at that. Dang! All that work then they go & spoil it specially with them burning coffin nails in it. Hope it all pans out well for your continuing build.
Touring Bruce
Posted 16 December 2016 - 05:10 PM
Went to the wreckers yesterday to get the overflow hardpipe across the top of the rad as the B4 one ive got is hack. Manged to be the first person to touch a 3/4 WRX with many goodies on it including a big garrett turbo that proved far to hard to get off with my limited tools. Got my pipe and was checking out the rest of the car and found a full stainless 3" Veilside oval muffler sitting in the boot. 
Its not from the WRX and the hangers apparently suit a nissan ¯\(°_o)/¯ Its not far off subaru specs so will get it made to do when i get my catback on eventually. Couldnt say no for a proper jdm sweg muffler for $39 lol
Suby Club Community →
Members Photos →
Camo's Gen 3 RX LibStarted by LockieGEN3, 11 Jul 2017  liberty, rx
|
|
|
||
Suby Club Community →
Members Photos →
My Gen3 RX LibertyStarted by LockieGEN3, 23 May 2017 rx, sedan, manual
|
|
|
||
Tech: The basics →
Twin Turbo →
Gen 2 EJ22NA to EJ20TT conversionStarted by zacsuby, 14 Nov 2016 Gen 2, twin turbo, EJ20, EJ22 and 3 more...
|
|
|
||
Model Specific →
Liberty / Legacy / Outback →
General Discussion →
Power steering cut out?Started by shybrenn, 27 Dec 2015 power, steering, 98, liberty and 1 more...
|
|
|
||
Suby Club Community →
General Discussion →
Concerning jolting and shaking of carStarted by 02_Liberty_RX, 14 Nov 2015 Liberty, Gen 3, RX
|
|
|
0 members, 0 guests, 0 anonymous users
