Yup. i'll change it back at some point. The battery is tiny and needs an upgrade in size anyway.
#141 Guest_KONG_*
Posted 08 May 2015 - 06:32 PM
#142
Posted 08 May 2015 - 08:18 PM
At some point some douche has changed the terminals to suit a cheaper battery and the wiring was messy as fork.
Down here some roadside battery installers tell the customers the terminals are forked and need replacing, at an extra cost.
It's because the stupid fkwts don't carry the small post batteries. They fit the larger terminals so they can install the more common large post battery.
Cubts should be horse-whipped and shot.
If I told you I was a compulsive liar, would you believe me?
#143
Posted 10 May 2015 - 05:21 PM
Is there some standard with the terminal sizes ?
My JDM loom had different sizes (larger diameter neg terminal) to my AUDM.
Kong - what do you use on your rubber lines and engine bay plastics? -- they're so black and shiny!
#144
Posted 10 May 2015 - 05:30 PM
Is there some standard with the terminal sizes ?
Apart from the positive always being slightly larger than the negative, there are two sizes of tapered posts.
This pic shows a small post battery (like a GenIII RX) with adapters to make it fit a large post terminal (like GenIV RB).
If I told you I was a compulsive liar, would you believe me?
#145
Posted 10 May 2015 - 06:08 PM
JDM Hid headlamps installed.
Hopefully as bright as 10000 suns. No leveler switch installed & The parker bulbs are shit. I'm looking into my options as far as parkers go.
I'll have to see what my parker/cornering globes are. They came with the headlights from Japan, are a chrome bulb and light up white for a pretty good match with the HID's.
OEM+
#146
Posted 10 May 2015 - 06:25 PM
#147
Posted 10 May 2015 - 06:37 PM
That's right Morgs. Rev A-C uses shitty brake globe style bayonets (5/25w) while D-E have (i think) a proper T20 fitting. Makes it hard for us A-C dudes to find something that matches the HID's. Best I could find hardly puts out enough light to be a useful corner lamp (even though its a dual filament LED type) and the supposed "white" light comes out practically blue, hate it.
'04 Liberty GT Premium "The Sprog Chariot"
#148 Guest_KONG_*
Posted 11 May 2015 - 09:49 AM
Yeah, T20 dual filament as Jimbo & Morganus stated. The orange glow from them does match the fog lights but I'm not crazy about the colour.
@ Duncanm.... I use a product called flash dash. It's a general purpose interior vinyl, leather & plastic protectant which is similar in ways to say Armor all, but doesn't leave the greasy silicone finish.
I'm nearly out of it TBH and I don't think it's made anymore. Sucks.
For the hard plastics I drench them in tyre shine and leave it sit for a fair bit, then hand buff dry & clean.
#149
Posted 11 May 2015 - 10:45 AM
#150 Guest_KONG_*
Posted 27 May 2015 - 09:55 AM
Update required.
Gates Racing belts installed.
Blitzen boot wing.
Turbo bonnet. It's actually in pretty good condition, excuse the filth and dew.
Rear Billies, going in today. Should drop the rear a fair bit. I didn't have to compress the Tein springs to fit them.
Fresh from Cruisin, going on this afternoon also.
And a pic of a blimp that was spying on me.
#151
Posted 27 May 2015 - 09:57 AM
What's in the sti packet?
#152
Posted 27 May 2015 - 10:02 AM
Cars looking good Kong!
#153 Guest_KONG_*
Posted 27 May 2015 - 10:03 AM
STi gearbox mount rubber things, Wob.
#154 Guest_KONG_*
Posted 27 May 2015 - 10:06 AM
Cars looking good Kong!
Mate she's a damn tidy rig, it's such a shame about the cactus roof paint. I think it's worth getting fixed, at tax time..... maybe? We'll see.
#155
Posted 27 May 2015 - 03:32 PM
Looking good man. Gotta love those brakes, they look schmick.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#156
Posted 27 May 2015 - 05:46 PM
Can't go wrong with white on red 4 pots.
#157
Posted 27 May 2015 - 05:53 PM
Im a fan of red calipers with white logo's. Goes with everything.
OEM+
#158
Posted 27 May 2015 - 07:07 PM
Also tagged with one or more of these keywords: Bewbs, Beer
Tech: The basics →
Electrical/Electronics →
Replacing an ECU - What you need.Started by Guest_KONG_* , 18 Jan 2016 boobs, kong, FFS, beer, poonani |
|
|
||
Beer
Suby Club Community →
Anything Goes →
Home Beer/Cider BrewingStarted by MrSober88, 24 Jul 2015 Beer, Beer Brewing, Cider Brewing |
|
|||
Model Specific →
Liberty / Legacy / Outback →
Builds and Projects →
Josh's Hobokong B4 : Whitekong Mk2Started by Guest_KONG_* , 16 May 2015 boobs, TT, beer |
|
|||
Tech: The basics →
Do-It-Yourself Guides →
DIY: How to raise your number plateStarted by Guest_KONG_* , 16 Apr 2015 cubt, beer, boobs |
|
|||
Tech: The basics →
Maintenance →
Everything you need to know about Spark plugsStarted by Guest_KONG_* , 05 May 2014 Boobs, plugs, sparkplugs, Gap and 6 more... |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users