Looks good mate. The 2.5 normally looks really messy. Take much modifying to fit it ?
#141
Posted 05 June 2016 - 07:29 PM
#142
Posted 05 June 2016 - 07:31 PM
Just trimmed off the part that would go around the top mount, and made up a couple of bracket extensions to mount it properly!Looks good mate. The 2.5 normally looks really messy. Take much modifying to fit it ?
Sent from my iPhone using Tapatalk
#143
Posted 05 June 2016 - 08:55 PM
Looking good mate, it's amazing how much neater the engine bay looks, and how factory the turbo engine cover looks too!
#144
Posted 05 June 2016 - 10:24 PM
Looking good mate, it's amazing how much neater the engine bay looks, and how factory the turbo engine cover looks too!
As far as the engine bay goes that's about all i'll do, except maybe a master cylinder stopper.
#145
Posted 06 June 2016 - 01:02 PM
As far as the engine bay goes that's about all i'll do, except maybe a master cylinder stopper.
Fair enough, A Cusco strut brace with brake stopper is on my list of things to do.
#146
Posted 19 June 2016 - 11:05 PM
Acquired these Enkei RS05's on Saturday. 18x.7.5 so a little bit smaller than my RPF1's. I really like the look of these. Shame the tyres are made of butter so they'll need replacing. Trip down to thredbo planned for this coming weekend so if anyone has roof racks for a GEN 4 liberty theyd like to part with/lend please let me know
IMG_1870.jpg 80.86KB 10 downloads
IMG_1876.jpg 278.61KB 10 downloads
IMG_1878.jpg 243.23KB 10 downloads
IMG_1882.jpg 147.85KB 10 downloads
IMG_1889.jpg 97.15KB 10 downloads
#147
Posted 20 June 2016 - 09:03 AM
#148
Posted 20 June 2016 - 09:10 AM
Wow man they look absoluley amazing, I actually think I prefer those on your car as the white 17"s really suited Nigels car.
#149
Posted 20 June 2016 - 09:19 AM
Sent from my iPhone using Tapatalk
#150
Posted 20 June 2016 - 10:15 AM
Yeah very interesting. They really do look bigger then 17", must be the white, but for you I really like the gold IMO.
#151
Posted 20 June 2016 - 02:19 PM
Run back to hills, and find more gold I say.
#152
Posted 20 June 2016 - 05:26 PM
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#153
Posted 20 June 2016 - 06:31 PM
OEM+
#154
Posted 12 July 2016 - 03:57 PM
Small update. Had a bit of DIY fun over the weekend. Mounted a light bar behind my front grill, as well as shading the lens for a more stealthy look (had no effect on light output). Very happy with the end result. Wasn't expecting anything amazing as it was on sale at supercheap. Total cost was $150 for the bar and everything used to mount it. Will switch to HID highbeams for even more visibility. Has made driving dark back roads much more relaxing at night (multiple wildlife encounters recently. Snapped a mount to rear swaybar bolts onto during a Putty Road run, hopefully get that fixed up next week in time for my next trip to the snow. Potentially considering getting my RPF1's resprayed a new colour.
DSC_0356.JPG 103.88KB 7 downloads
DSC_0358.JPG 149.26KB 7 downloads
DSC_0360.JPG 108.4KB 7 downloads
DSC_0361.JPG 103.81KB 8 downloads
DSC_0354edit.jpg 214.62KB 8 downloads
#155
Posted 12 July 2016 - 04:01 PM
Concerned about overheating?
#156
Posted 12 July 2016 - 04:04 PM
Concerned about overheating?
Have heard from multiple people they've never had any issues with mounting the bar there. Haven't noticed any difference in temps since fitting it. Will give it time. If it decides to have a negative effect it will be relocated.
#157
Posted 12 July 2016 - 04:08 PM
If you had the lights moving from left to right, could look like Knight Rider
2002 B4 Rev E
2004 Outback Premium 3.0R
#158
Posted 22 July 2016 - 10:46 PM
Update time.. My Bridgestone RE003's were rather worn and were up for replacement. Was going to settle for another set of them until I found out about the buy 4 get 1 free deal with Yokohama currently. I went with the Advan AD08r's (ended up being cheaper than another set of RE003's). They have exceeded my expectations, just got home from a proper test drive on them and i'm completely amazed. Iv'e finally had to roll my guards, these tyres have a different style side wall to my previous ones, was scrubbing quite bad. Eliminated most scrubbing after rolling them. Got my swaybar issue sorted (no more boaty feels) had the mounts reinforced so hopefully they won't break again in the future.
IMG_4383.JPG 90.7KB 8 downloads
IMG_4392.JPG 130.4KB 8 downloads
#159
Posted 22 July 2016 - 10:58 PM
Gotta love new tyres and their meaty appearance. I think I may be due for a new set later in the year.
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#160
Posted 22 July 2016 - 11:01 PM
Gotta love new tyres and their meaty appearance. I think I may be due for a new set later in the year.
They're a great looking tyre, ill get some better pics in the daylight
Also tagged with one or more of these keywords: Liberty
Model Specific →
Liberty / Legacy / Outback →
Engine / Driveline →
Steel WheelsStarted by podmak, 12 Sep 2023 steelies, steel rims, 3rd gen and 3 more... |
|
|||
Model Specific →
Liberty / Legacy / Outback →
Builds and Projects →
Tim's Liberty RS30+Started by timslib, 08 Jan 2021 bee, bh, gen3, be5, be9, liberty and 3 more... |
|
|||
Suby Club Community →
General Discussion →
09 Liberty vs 09 Outback - I need help picking a carStarted by RedRocket13, 27 Feb 2020 Liberty, Outback, vs and 1 more... |
|
|||
Suby Club Community →
General Discussion →
Subaru Liberty Mechanic CostsStarted by SubaruLiberty, 25 Aug 2019 Liberty |
|
|||
Model Specific →
Liberty / Legacy / Outback →
Engine / Driveline →
Engine / trans compatibilityStarted by Itsowrong, 28 Oct 2018 trans, engine, Liberty |
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users