Apprenticeship @ 16 y/o, never looked back.

Barbbachello's 98 Silver Anniversary BD
#301
Posted 04 November 2013 - 11:15 PM
OEM+
#302
Posted 04 November 2013 - 11:17 PM
Apprenticeship @ 16 y/o, never looked back.
I dont regret going to uni. Most of my stress is from leaving stuff till the last minute lol
Any suggestions on where to get the skirts resprayed?
#303
Posted 04 November 2013 - 11:23 PM
I use Ideal Body Repairs in Bond st Abbotsford.
OEM+
#304
Posted 06 November 2013 - 11:58 AM
Saw you going down Rooks rd today... Looking for a Painter?
I sometimes regret not doing a trade.. Especially when my Cousin who i have 2 years on.. works at the Quarry and makes 140k almost double what i make after dropping out of school at 15...
My painter has disappeared off the face of the forking planet.. so i have to find a new guy to do all my work..
But I should have my bar on before XMAS BBQ
only like 1.5 years on from when Mark sold it to me
#305
Posted 06 November 2013 - 12:17 PM
Saw you going down Rooks rd today... Looking for a Painter?
I sometimes regret not doing a trade.. Especially when my Cousin who i have 2 years on.. works at the Quarry and makes 140k almost double what i make after dropping out of school at 15...
My painter has disappeared off the face of the forking planet.. so i have to find a new guy to do all my work..
But I should have my bar on before XMAS BBQ
only like 1.5 years on from when Mark sold it to me
A friend needed a lift to the station. I was still a bit asleep so wasnt on the look out haha. I think ill go to the place my mate got his aero kit done. Pretty cheap and ive seen some orange peeling but for skirts im not overly fussed
Mine is estimated to arrive mid december . But hopefully ill be able to get it on quickly as fingers crossed the paint is good
#306
Posted 06 November 2013 - 05:10 PM
#307
Posted 06 November 2013 - 05:15 PM
Stay out of my neighbourhood.
wat
#308
Posted 14 November 2013 - 05:38 PM
Quoted $400 for both the side skirts and the rear skirt. So now we play the saving game
#309
Posted 14 November 2013 - 05:46 PM
#310
Posted 14 November 2013 - 05:50 PM
Serious! I was hoping to get my front and rear bar painted for $500. I have a feeling it's going more than that based on your quote.
My mate is getting his front bar painted for 300. Its a bit of a cheap shop as ive seen a bit of orange peel in my mates silvia thats had some touch ups. But for skirts i dont mind as how often do you look closely at skirts
#311
Posted 14 November 2013 - 05:56 PM
Yea ill get some quotes first , I know of a few places that might do it cheap from me. Their work seems ok.
#312
Posted 14 November 2013 - 05:58 PM
wat
It was a joke fkn.
#313
Posted 23 November 2013 - 12:03 PM
Someone presumably blew their head gasket and donated their silver rx to pick a part. Unfortunately the fools there left the car on steelies resting on its perfectly good silver skirts ಠ_ಠ which are now cracked and mangled. Managed to get myself the rear skirt in silver and all the mounting bits for $30 though
#314
Posted 24 November 2013 - 12:05 PM
Is the RX manual?
OEM+
#315
Posted 24 November 2013 - 12:34 PM
Is the RX manual?
Yeah. Jollys Dandenong
#316
Posted 16 December 2013 - 12:08 PM
Who says sedans arent practical
#317
Posted 16 December 2013 - 01:52 PM
You can get a lot in there if you try hard enough!
#318
Posted 16 December 2013 - 01:54 PM
Shouldn't that be on the front of your car?
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
#319
Posted 16 December 2013 - 03:34 PM
So the GTB bar i ordered in October finally arrived. Came with the bumper support which made it 10x easier as i didnt have to fiddle with those god damn clips. Simply removed the old support and put the new one on.
Should have put an interfooler on at the same time. Next time
#320
Posted 16 December 2013 - 03:37 PM
Looks good
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
Also tagged with one or more of these keywords: Liberty, Legacy, 98, Sedan, Silver Anniversary, Barbbachello
Model Specific →
Liberty / Legacy / Outback →
Engine / Driveline →
Steel WheelsStarted by podmak, 12 Sep 2023 ![]() |
|
![]() |
||
Model Specific →
Liberty / Legacy / Outback →
Builds and Projects →
Tim's Liberty RS30+Started by timslib, 08 Jan 2021 ![]() |
|
![]() |
||
Model Specific →
Liberty / Legacy / Outback →
Engine / Driveline →
Gen 3 BE/BH Bushing and Links Upgrade GuideStarted by timslib, 08 Jan 2021 ![]() |
|
![]() |
||
Suby Club Community →
General Discussion →
09 Liberty vs 09 Outback - I need help picking a carStarted by RedRocket13, 27 Feb 2020 ![]() |
|
![]() |
||
Suby Club Community →
General Discussion →
Subaru Liberty Mechanic CostsStarted by SubaruLiberty, 25 Aug 2019 ![]() |
|
![]() |
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users