
Gen3 Outback to JDM WRX Conversion
#402
Posted 06 March 2013 - 07:28 AM
#403
Posted 06 March 2013 - 07:41 AM
#404
Posted 06 March 2013 - 09:27 AM
Wanting to buy/looking for: single genuine STi rim, genuine STi front lip, Corazon or Zero/Sports grille and another OEM grille
Can you hook a brother up? Please contact me now. I have cash ready.
~
~
#405
Posted 06 March 2013 - 10:52 AM
I have weird neighbours. He doesn't even live there...
Thanks guys!

#406
Posted 15 September 2013 - 11:16 AM
A few changes since my last update here.
I picked up a new set of rims and tyres.
XXR527 18 x 9.75 +22 with 215/40r18 tyres stretched onto them.
I then plastidipped the car matte black, and it stayed like that for about 2 months until I got sick of it and took it all off. Although the black looked awesome and mean, I wanted my car as clean and neat as possible, so gave it a full detail, inside and out.
I got the dent that has been in the rear of the car fixed and resprayed and looks 10000000000 times better.
I then started focussing on more genuine products for the wagon, so purchased some Perrin products from Car Mods Australia.
-Perrin radiator shroud
-Perrin pulley cover
-Grimmspeed 3 port boost solenoid
Then some more mods came.
-Drift oil catch can, Drift pod filter
-660CCA Battery, sump guard
-Tomei even length headers
-3" Turbo back exhaust
-XForce muffler.
-Red Superbright LEDs for dash cluster
-Titanium Gearknob
-Momo steering wheel
-Hella Supertones
And lastly, a brand new set of Work Emotion XD9 18x10 +38 with 235/40r18 tyres, genuine Work Emotion tuner wheel nuts, a set of ARP lengthened wheel studs and some 8mm spacers front and rear.
Really hope to have the new TD05 18G and ID1000CC injectors in ASAP.
Pics up very very shortly.
Sam
#407
Posted 15 September 2013 - 11:34 AM


#408
Posted 15 September 2013 - 12:21 PM
hey mate, what specs are the xd 9's looking at putting them on my rx sedan
and what else did you have to do to fit them?
Alex
#409
Posted 15 September 2013 - 12:32 PM
Hey man,
Theyre 18x10 +38 and I do need to run 8mm spacers minimum to fit them. I do however have ARP lengthened wheel studs on the way, and I have gutted the inside of the guards with an angle grinder.
I wanted the 10" wide rims because it had the 3" lip, where as the 9" only had 45mm lip.
#410
Posted 15 September 2013 - 10:09 PM
Just took off Xforce muffler and replaced with pig/drift pipes, sounds fat but will need to source some kind of hotdog or muffler to quieten it slightly.
And roof racks removed once again.
Change is always good.
#411
Posted 15 September 2013 - 10:15 PM
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
#412
Posted 15 September 2013 - 10:17 PM
Nice one!
#413
Posted 15 September 2013 - 10:18 PM
#414
Posted 15 September 2013 - 10:26 PM
I am thinking white.
#415
Posted 18 September 2013 - 06:46 PM
Plastidip white, with pearliser. Looks nuts. Plus I like the fact its not permanant. My gold STi wheels are being dipped gloss black when I find the time to do it.
MY00 Red RX, a nice daily that was sold off once the B4 became reliable...
MY02 Blue B4, aka 'The Project' - v8 JDM STi engine package and assorted other 'goodies' - Sold, then bought back for parts. Stripped and crushed.
MY03 Blue RX, the newer old daily, pretty well more B4 than RX now... In the process of being converted to the track toy... Watch this space!
MY02 Silver Wagon, H6 conversion, full blue/black leather and almost full black interior to go with it. In process of being stripped and sold off.
MY03 White/Silver H6 Outback, donor car for silver waghoon. Scrapped.
MY97 Silver RX, acquired to become track car, but plans changed. Scrapped.
MY13 BRG, current daily, very nice to drive, small mods to make it even nicer again.
#416
Posted 18 September 2013 - 06:52 PM
Do I spot a snapped strut top nut?
#417
Posted 18 September 2013 - 07:02 PM
On the list of things to be fixed.

As of today.
So much better!
#418
Posted 18 September 2013 - 07:03 PM
JEBUS!!!
I should just convert to single, right?As soon as she hands it to you, slowly take of your pants, then, while staring her straight in the eyes rub it against the tip of you penis, while continuing your painfully intense gaze whisper to her;
"My eye is watering, this might be a bit hot"
Horsepower Factory
Revzone Auto Tuning Centre
#419
Posted 18 September 2013 - 07:03 PM
HNNG!
#420
Posted 18 September 2013 - 07:09 PM
Needs new Work Emotion stickers though...
Also tagged with one or more of these keywords: Gen3, turbo, outback turbo, jdm, wrx, engine, conversion, STI
Tech: The basics →
Do-It-Yourself Guides →
Info: Turbo EZ30D knowledge baseStarted by timslib, 02 Jul 2021 ![]() |
|
![]() |
||
Model Specific →
Liberty / Legacy / Outback →
Builds and Projects →
Tim's Liberty RS30+Started by timslib, 08 Jan 2021 ![]() |
|
![]() |
||
Tech: The basics →
Single Turbo →
Where to get turbos rebuilt?Started by El_Freddo, 03 Sep 2020 ![]() |
|
![]() |
||
Tech: The basics →
General →
Connection failedStarted by Jomsaf, 08 Apr 2020 ![]() |
|
![]() |
||
Model Specific →
Impreza / WRX / STi →
Engine / Driveline →
NA Impreza engine part compatibility?Started by Sweezyboi, 27 Sep 2019 ![]() |
|
![]() |
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users